Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

macpro00

macrumors member
Original poster
Feb 7, 2016
83
7
cMP 5,1 (hack) X5675 3.06 / 6 core
 

Attachments

  • x5675_gtx120.png
    x5675_gtx120.png
    201.1 KB · Views: 559

Raunien

macrumors 6502a
Aug 3, 2011
535
57
5,1 W3690 idle
 

Attachments

  • Screen Shot 2016-02-25 at 10.04.51 PM.png
    Screen Shot 2016-02-25 at 10.04.51 PM.png
    86.1 KB · Views: 490

sigmadog

macrumors 6502a
Feb 11, 2009
835
753
just west of Idaho
It's about 34°(F) right now, but the sun's coming out tomorrow, so it should climb into the upper 40's and maybe even into the low 50's.

Bit of an odd thread for Mac Pro's, but whatever…
 
  • Like
Reactions: AlliFlowers

h9826790

macrumors P6
Apr 3, 2014
16,611
8,537
Hong Kong
It's about 34°(F) right now, but the sun's coming out tomorrow, so it should climb into the upper 40's and maybe even into the low 50's.

Bit of an odd thread for Mac Pro's, but whatever…

Yeah, my temperature is almost always 37.5C :D
[doublepost=1456467427][/doublepost]

There is no split between the 2 PSU temperature. It happen to me last time when there are full of dust inside the PSU.
 

ApfelKuchen

macrumors 601
Aug 28, 2012
4,334
3,010
Between the coasts
Uh... What good is a temperature read-out without knowing the operating conditions? Are you running benchmarks? Is the machine idling? Transcoding 4K video?

To adapt a phrase, it ain't the heat, it's the function. These are tools, designed to do work. If you work them hard, they get warm, the fans kick in... and if they get too hot, the OS shuts the machine down before it melts. There is no anti-freeze to evaporate, the engine block will not crack. If the longevity of your equipment is more important than the work you do upon it... send it to a museum, now.
 

h9826790

macrumors P6
Apr 3, 2014
16,611
8,537
Hong Kong
What? I'm lost...

Sorry for my poor English.

I mean both your "PS, AC/DC Supply 1" and "PS, AC/DC Supply 2" temperatures are 108. When my PSU is clean, there are always few degrees difference.

Screen Shot 2016-02-26 at 21.57.45.jpg


The last time I have both readings are the same, is when there are lots of dust in the PSU, which cause them to run warmer. Another temperature monitoring programme suggest that one of the reading is the PSU component, and the other one is the PSU ambient.

When the airflow is good, the PSU ambient (PSU 1) temperature should be few degrees cooler than the PSU component (PSU 2) temperature. However, when the airflow is blocked (e.g. by dust), then the heat will be trapped, which cause the PSU 1 temperature very close to the PSU 2 temperature.
 
Last edited:

justmetoo

macrumors newbie
Since I installed a GTX 560Ti with aftermarket Artic Cooling solution (heat sink in the case of course, fans do not vent outside, at least not directly...) into my MP 1,1 I simply added a 9 cm fan on the outside of the empty PCIe slots at the back of the case, and ran power from a splitter off the DVD power line.

The fact that there is no additional cooling fan on the back of these old MP's is a real engineering oversight IMHO...
 

BillyBobBongo

macrumors 68030
Jun 21, 2007
2,535
1,139
On The Interweb Thingy!
Would adding vented slots (pci) help with airflow?

The Mac Pro was designed without this sort of thing, I wouldn't add them. But chances are they would improve airflow to a certain degree. However, I'm not even sure that they would fit.

Our wonderful IT staff in my office had their hands on my Mac Pro (2009 model) at one point, these days I don't allow them near it, and it came back to me with a PC PCI cover instead of a Mac one. The reason I noticed is that it didn't quite fit, the PC cover appeared slightly larger than the native Mac ones. The IT staff had used brute force to get the retaining clamp in, and of course had no idea where the original Mac one had gone to.

I removed the offending PCI cover and showed in an GT 120 to fill up the gap instead. I have one or two floating around as spares.

Gotta love IT.
 
Last edited:
  • Like
Reactions: scott.n

macpro00

macrumors member
Original poster
Feb 7, 2016
83
7

I am not sure if I want to add additional hardware that require power from PSU. Definitely think having objects removed around the tower will help with air flow. In the meantime, I removed a slot cover thinking that this will help improve air flow (I am sure dust, as well, but I am pretty OCD about cleaning/maintaining my stuff). Looks a bit weird of just having a random opening in the back... but it does give me some peace of mind.
 

scott.n

macrumors 6502
Dec 17, 2010
339
78
Dual X5677, idle/Macrumors surfing.
 

Attachments

  • Dual X5677.png
    Dual X5677.png
    390.4 KB · Views: 266
Last edited:

macpro00

macrumors member
Original poster
Feb 7, 2016
83
7
UPDATE: X5675 w/ EVGA GTX 760 (newly installed) -- idle / Macrumors surfing

CPU temp (avg) remained the same; fan speed (RPM) increased
 

Attachments

  • x5675_gtx760.png
    x5675_gtx760.png
    187.7 KB · Views: 281
  • x5675_gtx120.png
    x5675_gtx120.png
    201.1 KB · Views: 258

DPUser

macrumors 6502a
Jan 17, 2012
986
298
Rancho Bohemia, California
What are you guys using to monitor temps under El Cap? I building a second hex 4,1>5,1 and plan on trying El Cap out. I'm using the now-discontinued Temperature Monitor on my studio machine running Mountain Lion.

Looks like Hardware Monitor now includes all Temperature Monitor functions and has been updated to El Cap. Anyone using it?

Thanks!
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.