Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

joeniles

macrumors newbie
Original poster
May 1, 2021
25
20
I've order my iMac 2021 24 inch. I've got time machine for backup and using Carbon Copy. I've got all my doc on and external Drive. I've never used Thunder Bolt before. What do I need to do? What's a good Thunder Bolt hub. I have 7 external Drives and usb Scanner. Planning on using my TV for display if needed.

Thanks for any input...

Joe Niles
 

4sallypat

macrumors 68040
Sep 16, 2016
3,499
3,307
So Calif
The higher quality hubs are OWC and CalDigit.

I have a 2019 that I am migrating and also ordered the 24" M1 iMac base and plan on using a hub for my USB-A devices and the other TB port will be for my 2nd display (Apple) using a TB3-2 adapter.

This is what I use:
IMG_7232.jpg
 

Fishrrman

macrumors Penryn
Feb 20, 2009
28,526
12,655
Here's my pre-written guide on how to migrate to a new Mac:
==============================================
If you follow my instructions below, I guarantee a success rate of 98%:
PRINT OUT these instructions and check them off as you go along.

1. BEFORE you do anything else, run a "final" backup on your old Mac. Use an external drive for this. It can be either TM or a cloned backup using CarbonCopyCloner or SuperDuper. I prefer CCC.
I STRONGLY RECOMMEND THAT YOU DO NOT USE TM AS YOUR "MIGRATION EXTERNAL DRIVE". INSTEAD, USE EITHER CCC OR SD. Things will go better this way!
2. Shut down the old Mac and disconnect the external drive
3. Take the new Mac out of the box and set it up on the table. DO NOT PRESS THE POWER ON BUTTON until step 8 (read on). You don't want to begin setup until "the right moment".
4. If you're using an external display, connect the display using the usb-c/VGA adapter/cable that you have
5. Connect the keyboard and mouse if you use them. I STRONGLY SUGGEST that you connect them DIRECTLY to the Mac.
6. If you use a hub, leave it DISCONNECTED for now
7. Connect your backup drive -- use a usb-c adapter if needed.

OK, we're ready-to-go, so let's get goin':
8. Press the power on button for the first time.
9. The new Mac may ask for help "finding" the keyboard, just follow instructions.
10. Begin setup. At the appropriate moment, setup assistant will ask if you wish to migrate from another Mac or drive. YES, you want to do this.
11. "Aim" setup assistant at the external backup. Setup assistant will need a little time to "digest it all". BE PATIENT and give setup assistant the time it needs.
12. You will now see a list of things that can be migrated, such as applications, accounts, settings and data.
13. I suggest that you select ALL of them.
14. Let setup assistant "do its thing". It's going to TAKE A WHILE to move things over. Again, be patient. If you have a lot "of stuff", it will take a lot of time!
15. When done, you should see the login screen. Go ahead and login.
16. Once logged in, things should look pretty much as they looked on your old Mac.
17. You should check all your apps. Some may not run, and may require upgrading.
18. You can set aside the old backup, or ... "repurpose it" to become the backup for the new Mac. I'd keep the old one around for a week or so, at least.
 

RCPhotos

macrumors newbie
Mar 21, 2019
23
9
PNW
I've order my iMac 2021 24 inch. I've got time machine for backup and using Carbon Copy. I've got all my doc on and external Drive. I've never used Thunder Bolt before. What do I need to do? What's a good Thunder Bolt hub. I have 7 external Drives and usb Scanner. Planning on using my TV for display if needed.

Thanks for any input...

Joe Niles
I'm following your question Joe, as I'll soon be doing the same thing with external drives
 
  • Like
Reactions: joeniles
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.