MP 1,1-5,1 Im Painting My Mac Pro 5,1

[JDLang76]

Saw a youtuber do it. I was inspired. First attempt at spray painting anything. About half way done. Colors are matte black with OWC blue highlights (to match their ram) Also gonna put a little captain america shield stencil on the middle deck fan just for fun.

Ill update a couple more times. Let me know what you think or if you have suggestions. Not sure if im going to paint more of the 1080 ti yet or not. For now, just the blue bar and black screws.

oh and specs - 2x5690 - 1080 ti FE flashed - 128gb OWC ram

 

[MIKX]

Nice ! the galvanised finish in the standard cMP gradually gets tarnished & unsightly from finger oils + grime etc. I might try this when I get some spare time.

Can you post some pics when the project is finished ?

 

[JDLang76]

Yes i

Nice ! the galvanised finish in the standard cMP gradually gets tarnished & unsightly from finger oils + grime etc. I might try this when I get some spare time.

Can you post some pics when the project is finished ?

Yes, i will likely post one more round of photos as an update and then i will post finished photos. Its gonna be about a week until im done.

 

[reukiodo]

How easily does the paint scratch? I suppose I could try this on my spare G5 Quad, but since those are more relatively rare, maybe I should pick up a dirt cheap MP1,1 since there are lots of those.

 

[JDLang76]

How easily does the paint scratch? I suppose I could try this on my spare G5 Quad, but since those are more relatively rare, maybe I should pick up a dirt cheap MP1,1 since there are lots of those.

Im using Krylon Paint and Primer all in one. Im only using 1-2 coats (which is not enough for resiliency) The paint scratches easily for me. But mine will be babied on display once done, i wont handle it hardly at all. I would assume people who know more about painting could prevent it from being so easily scratched? But I dont know. I have 3 units, so i get 3 attempts per part lol
[automerge]1572425847[/automerge]

 

[thisisnotmyname]

How easily does the paint scratch? I suppose I could try this on my spare G5 Quad, but since those are more relatively rare, maybe I should pick up a dirt cheap MP1,1 since there are lots of those.

It would probably be pretty cheap to take the parts to an auto body shop and have them paint it for you.

 

[majus]

It would probably be pretty cheap to take the parts to an auto body shop and have them paint it for you.

The case itself could be anodized in black very cheaply.

Paint is not forever, but it can last longer if, after it has cured, a couple of polyurethane coats are applied. With the polyurethane coating it is much more durable.

 

[JDLang76]

It would probably be pretty cheap to take the parts to an auto body shop and have them paint it for you.

Agreed. Just gotta make sure they dont slack off with protecting things like PSU internals

 

[thisisnotmyname]

Agreed. Just gotta make sure they dont slack off with protecting things like PSU internals

You could mask it all up yourself in advance, probably save some labor in the process. For that matter they probably don't know enough to mask it themselves and would want you to anyway.

 

[JDLang76]

Getting there! I realized i have to paint the 2 cpu fans... And ive decided to leave the 1080 ti as-is on the basis of not feeling like taking it apart again. Waiting on my Cap stencil to arrive and then i should be about done

 

[DPUser]

Mac Vader.

 

[JDLang76]

My hex screw for the heatsinks and my captain america stencil came in. Waiting for some things to dry, have a couple of touch ups to do, then the stencil and then im done! Should post finished photos tomorrow.

 

[expede]

@DPUser "The ability to destroy a planet is insignificant next to the power of the force".

/Doc

 

[mBox]

My hex screw for the heatsinks and my captain america stencil came in. Waiting for some things to dry, have a couple of touch ups to do, then the stencil and then im done! Should post finished photos tomorrow. View attachment 874035

[automerge]1572552613[/automerge]
Darn I want to try that on my D700 nMP

 

[fatespawn]

My hex screw for the heatsinks and my captain america stencil came in. Waiting for some things to dry, have a couple of touch ups to do, then the stencil and then im done! Should post finished photos tomorrow. View attachment 874035

You should replace your Northbridge plastic rivets while you wait....

 

[JDLang76]

@DPUser "The ability to destroy a planet is insignificant next to the power of the force".

/Doc

Thanos might disagree
[automerge]1572558887[/automerge]

You should replace your Northbridge plastic rivets while you wait....

Too late. Its back together. Thanks though

 

[JDLang76]

All done (with the exception of a couple of minor touch ups) What do you think?

 

[OkiRun]

Getting there! I realized i have to paint the 2 cpu fans... And ive decided to leave the 1080 ti as-is on the basis of not feeling like taking it apart again. Waiting on my Cap stencil to arrive and then i should be about done

Neon lights?

 

[JDLang76]

Neon lights?

Huh?

 

[OkiRun]

Huh?

Your machine screams for some serious internal purple lighting.

 

[JDLang76]

Your machine screams for some serious internal purple lighting.

Ah. I dont like lights.

 

[reukiodo]

I modified a black MacBook to have the 2009 2.13GHz logic board and the ports are light inside dark, looks just like yours.

 

[DPUser]

Nicely done!

 

[majus]

Ah. I dont like lights.

You say you don't like lights, but wheels would be a nice touch, then purple neon running along the bottom of each side would go well with the black color. You would have the first lowrider computer in your neighborhood!

 

[sigmadog]

I think it looks great. I question the wisdom of painting the heat-sinks, however. I can't help but wonder if the paint will degrade cooling efficiency as opposed to raw metal.

Other than that I love it.