The AMD Boot Camp drivers don't contain drivers for the VII. Only the Vega II (Duo) and 580X.
Last edited:
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
MP 7,1 Radeon VII in the 7,1 Mac Pro
- Thread starter PowerMike G5
- Start date
- Sort by reaction score
The AMD Boot Camp drivers don't contain drivers for the VII. Only the Vega II (Duo) and 580X.
sorry but I don‘t get it
FCPX is only using 19/14% of the GPUs? So there is Multi-GPU Support....
With another settings I got 90% on both%sorry but I don‘t get it
FCPX is only using 19/14% of the GPUs? So there is Multi-GPU Support....
Using AMD graphics cards with Microsoft Windows on Mac Pro (2019) - Apple Support
Graphics cards from AMD might not work in Microsoft Windows when your Apple MPX Module and its drivers are also installed.
What settings? Thanks. I don't know if it's better 580x+RVII or only RVII to edit in FCPX
For dual GPU and editing, switch to Resolve Studio.
I run a Pro 5.1 with both rx5700XT and RX580; Pcie usb3.2 and BMD Pcie 4k minimonitor and this is really powerful, even on a old 2009 MacPro !
Based on 2 Raid arrays I can read 4 streams of slog3 4k on a 4k timeline without any proxy or optimized media.
I run a Pro 5.1 with both rx5700XT and RX580; Pcie usb3.2 and BMD Pcie 4k minimonitor and this is really powerful, even on a old 2009 MacPro !
Based on 2 Raid arrays I can read 4 streams of slog3 4k on a 4k timeline without any proxy or optimized media.
Interesting! Would you mind sharing some insights on your cMP running 2 GPUs? Did you do Pixlas mod or are you using an external PSU for one GPU? In addition to Resolve Studio, do you use other apps that take advantage of the dual GPU setup? I still have my RX580 and debating whether to sell it or install as 2nd GPU along my recently installed RX5700. Thanks!
It will be difficult to take photos as the MP is inside a server cabinet.
But yes I use Pcie riser (the cooler master one) to place on top of the MP the 5700XT (it takes 3 slots room as it is very large) and yes I use an additional PSU (850W Gold) to power the rx580 and the 5700XT.
Pcie1 is rx580 with 2 monitors one 2k and another 4k
Pcie2 is for 5700xt nothing plugged on it
Pcie3 is for the usb 3.2 board (I use an external usb 3.1 24 To raid system)
Pcie4 is for BMD decklink 4k minimonitor
system is on SSD, 2*HD 6TO raid 0 for the cache and 3*HD 8TO raid 0 for the media (all internal)
It is a dedicated editing station, so I sometime also use FCP and Compressor and Motion.
I have monitored that those 3 apps use the 2 GPUs, not al the time, but yes the 2 are used.
I did really many tests, and this is the fastest configuration I found. By the way the rx580 is a real good gpu, I have one in a Razer Core for my macbook Pro as mobile editing station.
Last edited:
for Stex (and others) : really bad quality and light, you will see why
I removed the xfx and re-instal it to take shots. I have changed the PSU, 850 was too much.![IMG_3498.JPG]( "IMG_3498.JPG")
![IMG_3496.JPG]( "IMG_3496.JPG")
![IMG_3497.JPG]( "IMG_3497.JPG")
![IMG_3495.JPG]( "IMG_3495.JPG")
![IMG_3494.JPG]( "IMG_3494.JPG")
I removed the xfx and re-instal it to take shots. I have changed the PSU, 850 was too much.
EPIC pictures man, these are legendary, what a cool mod !
Thanks for a pice of reality out In Da Field.
lol ! Of course the cpu room is closed by a plastic sheet to maintain fans air pressure and of course the 5700xt is "isolated" with foam pieces and the server cabinet is closed. Really simple to do, the hardest part is to "dremelize" the MTB side of the riser's connector to free the rx580 fans and to add a loop in the external PSU connector to power on without MTB. As you can see I add a led colored (red) fan just in front of the external PSU on the top, il adds air pressure in front of it and reminds me it is powered-on with the red light. Inside the server cabinet, it is a bit useful !
Very simple.
I did this way because of the servers cabinet I use. If it was a "desktop" configuration, I would have passed the wires differently in a more "clean" manner.
Very simple.
I did this way because of the servers cabinet I use. If it was a "desktop" configuration, I would have passed the wires differently in a more "clean" manner.
Last edited:
New upgrades scheduled :2 internal 2To ssd raid 0 for the DaVinci cache (instead of 2x6To HD)
A new USB 3.1 4x6TO external tower (RAID 0)
all GPU change for dual 6800XT (need more digging for now...)
A new USB 3.1 4x6TO external tower (RAID 0)
all GPU change for dual 6800XT (need more digging for now...)